Filter Results By
Browse
  • (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
    (1)
  • Brand
    Allied Machine and Eng. (136)
    Borite (113)
    Dorian (1)
    Fullerton Tool (12)
    Harvey Tool (57)
    Ingersoll (65)
    Internal Tool (273)
    Iscar (633)
    Lyndex (3)
    MTC (131)
    Micro 100 (222)
    Mitsubishi Materials USA (98)
    Monster Tool Company (131)
    Quality Import (11)
    Rapidkut (131)
    Techniks (1)
    Ultra-Dex (83)
    YG-1 Cutting Tools (1)
  • Campaign
    main_ISO Tools & Inserts (78)
    main_partoff inserts & tooling and Grooving inserts & holders (45)
  • Connection Diameter Machine Side (DCONMS)
    0.157″ (133)
    0.159″ (62)
    0.197″ (85)
    0.199″ (42)
    0.236″ (106)
    0.238″ (62)
    0.276″ (49)
    0.278″ (65)
    0.315″ (28)
    1/2″ (1)
  • Minimum Bore Diameter (DMIN)
    0.024″ (4)
    0.031″ (2)
    0.039″ (11)
    0.059″ (4)
    0.079″ (31)
    0.094″ (2)
    0.098″ (6)
    0.118″ (8)
    0.11″ (37)
    0.126″ (2)
    0.138″ (8)
    0.157″ (85)
    0.177″ (6)
    0.189″ (9)
    0.197″ (113)
    0.236″ (128)
    0.256″ (4)
    0.268″ (76)
    0.276″ (13)
    0.287″ (2)
    0.315″ (4)
    ‎2-1/2″ (1)
  • Functional Length (LF)
    0.748″ (11)
    0.787″ (9)
    0.866″ (5)
    0.945″ (38)
    0.984″ (12)
    1.004″ (2)
    1.024″ (7)
    1.102″ (1)
    1.142″ (5)
    1.181″ (99)
    1.22″ (28)
    1.24″ (2)
    1.26″ (30)
    1.339″ (24)
    1.378″ (23)
    1.417″ (50)
    1.437″ (1)
    1.457″ (15)
    1.496″ (7)
    1.575″ (37)
    1.614″ (58)
    1.654″ (7)
    1.673″ (1)
    1.693″ (21)
    1.772″ (23)
    1.811″ (24)
    1.968″ (21)
    2.008″ (32)
    2.165″ (9)
    2.205″ (4)
    2.244″ (7)
    2.303″ (2)
    2.362″ (4)
    2.402″ (4)
    2.48″ (2)
    2.559″ (5)
    2.598″ (1)
    2.795″ (1)
  • Reduced Body Diameter Length (LDRED)
    0.079″ (2)
    0.118″ (2)
    0.157″ (9)
    0.177″ (5)
    0.197″ (7)
    0.256″ (4)
    0.276″ (1)
    0.315″ (1)
    0.354″ (77)
    0.394″ (22)
    0.551″ (53)
    0.591″ (68)
    0.63″ (13)
    0.748″ (73)
    0.787″ (15)
    0.807″ (1)
    0.827″ (18)
    0.866″ (8)
    0.906″ (6)
    0.945″ (38)
    0.984″ (11)
    1.063″ (7)
    1.102″ (3)
    1.142″ (38)
    1.181″ (9)
    1.339″ (16)
    1.378″ (6)
    1.535″ (5)
    1.575″ (1)
    1.614″ (5)
    1.654″ (2)
    1.732″ (4)
    1.929″ (5)
    1.968″ (1)
  • Head Length (LH)
    0.591″ (16)
  • Cutting Direction (HAND)
    Left Hand (187)
    Right Hand (441)
  • Coating
    Bright (1)
    TiAlN (508)
    TiCN+TiN (100)
    Uncoated (6)
  • Coolant Supply Property (CSP)
    External (21)
    Through Hole (17)
  • Grade
    C-2 Sub-Micron (1)
    IB55 (6)
    IC228 (100)
    IC902 (23)
    IC908 (485)
  • Application
    Drill Face Ext Int Turn Thread (16)
    Drilling Ext Face Int. Turning (21)
    Face Grooving (56)
    Face Grooving Along Shaft (5)
    Int. 80° Diamond 95° Approach (12)
    Int. 80° Trigon 93° Approach (4)
    Int. Back Boring and Profiling (7)
    Int. Boring (34)
    Int. Boring and Profiling (351)
    Int. Chamfering (1)
    Int. Face Grooving (56)
    Int. Groove & Turn (56)
    Int. Grooving (56)
    Int. Profiling (7)
    Int. Turn & Chamfering (3)
    Internal Threading lay down (2)
    Pre Grooving with Chamfer (2)
    Threading (Int.) (60)
  • Applicable Material
    Aluminum / Non-Ferrous Materials (1)
    Cast Iron (615)
    Hard Materials (614)
    Hard Steel (1)
    Hi Temp Alloys (12)
    Stainless Steel (609)
    Steel (608)
    Super-Alloys / Titanium (597)
    Steel (1)
  • Front End Width (a)
    0.028″ (2)
    0.02″ (4)
    0.035″ (10)
    0.051″ (4)
    0.067″ (23)
    0.071″ (8)
    0.087″ (6)
    0.091″ (2)
    0.102″ (38)
    0.106″ (7)
    0.118″ (2)
    0.122″ (8)
    0.138″ (75)
    0.142″ (8)
    0.154″ (2)
    0.173″ (110)
    0.181″ (8)
    0.193″ (4)
    0.205″ (15)
    0.209″ (111)
    0.217″ (13)
    0.232″ (31)
    0.236″ (4)
    0.248″ (86)
    0.256″ (4)
    0.272″ (3)
    0.311″ (4)
  • Corner Radius (RE)
    0.001″ (11)
    0.002″ (72)
    0.0039″ (19)
    0.003″ (2)
    0.004″ (103)
    0.006″ (184)
    0.0079″ (6)
    0.008″ (22)
    0.0118″ (15)
    0.0197″ (6)
    0.0295″ (1)
    0.0315″ (2)
    0.0394″ (4)
    0.0492″ (1)
    0.059″ (2)
    0″ (56)
  • Cutting Depth Maximum (CDX)
    0.003″ (6)
    0.004″ (43)
    0.006″ (10)
    0.008″ (45)
    0.012″ (72)
    0.016″ (10)
    0.01″ (8)
    0.024″ (59)
    0.028″ (3)
    0.02″ (135)
    0.031″ (5)
    0.039″ (17)
    0.071″ (26)
    0.098″ (21)
    0.354″ (1)
    0.748″ (2)
    0.945″ (3)
    1.142″ (3)
    1.339″ (1)
    1.535″ (3)
  • Functional Width (WF)
    0.008″ (8)
    0.012″ (2)
    0.024″ (38)
    0.028″ (7)
    0.039″ (2)
    0.043″ (8)
    0.059″ (76)
    0.063″ (8)
    0.073″ (6)
    0.075″ (110)
    0.083″ (8)
    0.089″ (6)
    0.091″ (111)
    0.098″ (8)
    0.106″ (4)
    0.11″ (82)
    0.128″ (4)
    0.174″ (2)
  • Master Insert Identification (MIID)
    06IL A 55 (1)
    06IR A 55 (1)
    CCGT 03X101-F1P (12)
    WBMT 060101L (2)
    WBMT 060101R (2)
  • Usable Length (LU)
    0.0787″ (2)
    0.1181″ (2)
    0.1575″ (7)
    0.157″ (2)
    0.1772″ (4)
    0.177″ (3)
    0.1969″ (5)
    0.197″ (2)
    0.2362″ (1)
    0.2559″ (4)
    0.256″ (1)
    0.276″ (1)
    0.315″ (3)
    0.3543″ (26)
    0.354″ (52)
    0.3937″ (24)
    0.394″ (2)
    0.39″ (2)
    0.4724″ (6)
    0.5512″ (20)
    0.551″ (37)
    0.5906″ (35)
    0.591″ (16)
    0.59″ (2)
    0.6299″ (17)
    0.7087″ (4)
    0.748″ (73)
    0.7874″ (11)
    0.787″ (2)
    0.79″ (4)
    0.807″ (1)
    0.8268″ (8)
    0.827″ (13)
    0.8661″ (5)
    0.9055″ (4)
    0.906″ (2)
    0.9449″ (22)
    0.945″ (20)
    0.9842″ (11)
    0.98″ (10)
    1.063″ (7)
    1.1024″ (3)
    1.1417″ (14)
    1.142″ (24)
    1.1811″ (8)
    1.181″ (2)
    1.3386″ (14)
    1.339″ (3)
    1.378″ (7)
    1.5354″ (4)
    1.535″ (1)
    1.5748″ (2)
    1.6142″ (4)
    1.614″ (2)
    1.6535″ (2)
    1.7323″ (4)
    1.732″ (1)
    1.9291″ (4)
    1.929″ (1)
    1.9685″ (1)
  • Thread Pitch (TP)
    0.5 mm (14)
    0.75 mm (7)
    1 mm (15)
    1.25 mm (6)
    1.5 mm (12)
  • Overall Length (OAL)
    4″ (603)
  • Thread Form Type (THFT)
    M60 (16)
    VP55 (6)
    VP60 (54)

Solid Boring Bars

Filter Results By
Iscar
Remove all
Grid List
Results per page
Total: 633

Filters

PICCO R/L 050, 053, 055-ISC6402316 -I, Inserts for Internal Turning and Chamfering
Iscar
‎PICCO R 050.5-15 IC228
Price:
Package Size: 1
Item #: EH6402316
PICCO R/L 050, 053, 055-ISC6402331 -I, Inserts for Internal Turning and Chamfering
Iscar
‎PICCO L 050.7-20 IC228
Price:
Package Size: 1
Item #: EH6402331
PICCO R/L 050-C-ISC6404455 -I, Inserts with Chipformers for Internal Boring and Profiling
Iscar
‎PICCO L 050.4-20C IC908
Price:
Package Size: 1
Item #: EH6404455
PICCO-MF-ISC5530130 -I, Multifunction Solid Carbide Tools for Drilling, Facing, Internal and External Turning on Swiss and Small CNC Machines
Iscar
‎PICCO R-MF 8-7 L21 IC908
Price:
Package Size: 1
Item #: EH565530130
PICCO R/L 050, 053, 055-ISC6402321 -I, Inserts for Internal Turning and Chamfering
Iscar
‎PICCO R 050.5-30 IC228
Price:
Package Size: 1
Item #: EH6402321
PICCO R/L 050, 053, 055-ISC6402329 -I, Inserts for Internal Turning and Chamfering
Iscar
‎PICCO R 050.6-30 IC228
Price:
Package Size: 1
Item #: EH6402329
PICCO-MF-ISC5530131 -I, Multifunction Solid Carbide Tools for Drilling, Facing, Internal and External Turning on Swiss and Small CNC Machines
Iscar
‎PICCO R-MF 8-8 L16 IC908
Price:
Package Size: 1
Item #: EH645530131
PICCO-MF-ISC5530132 -I, Multifunction Solid Carbide Tools for Drilling, Facing, Internal and External Turning on Swiss and Small CNC Machines
Iscar
‎PICCO R-MF 8-8 L24 IC908
Price:
Package Size: 1
Item #: EH645530132
PICCO-MF-ISC5530135 -I, Multifunction Solid Carbide Tools for Drilling, Facing, Internal and External Turning on Swiss and Small CNC Machines
Iscar
‎PICCO L-MF 8-8 L16 IC908
Price:
Package Size: 1
Item #: EH645530135
PICCO R/L 050, 053, 055-ISC6402281 -I, Inserts for Internal Turning and Chamfering
Iscar
‎PICCO R 050.4-16 IC228
Price:
Package Size: 1
Item #: EH6402281
PICCO R/L 050, 053, 055-ISC6402282 -I, Inserts for Internal Turning and Chamfering
Iscar
‎PICCO R 050.3-16 IC228
Price:
Package Size: 1
Item #: EH6402282
PICCO R/L 050, 053, 055-ISC6402334 -I, Inserts for Internal Turning and Chamfering
Iscar
‎PICCO L 050.7-30 IC228
Price:
Package Size: 1
Item #: EH6402334
PICCO R/L 050, 053, 055-ISC6402335 -I, Inserts for Internal Turning and Chamfering
Iscar
‎PICCO R 050.7-30 IC228
Price:
Package Size: 1
Item #: EH6402335
PICCO R/L 050, 053, 055-ISC6402307 -I, Inserts for Internal Turning and Chamfering
Iscar
‎PICCO R 050.3-20 IC228
Price:
Package Size: 1
Item #: EH6402307
PICCO R/L 050, 053, 055-ISC6402310 -I, Inserts for Internal Turning and Chamfering
Iscar
‎PICCO L 050.4-10 IC228
Price:
Package Size: 1
Item #: EH6402310
Grid List
Results per page
Total: 633